What size dumpster do I need for a roofing or renovation project in Jacksonville?
For a Jacksonville roofing or renovation project, a 20-yard dumpster ($695) fits most shingle tear-offs and a 30-yard ($795) fits full remodels. Bin There Dump That Jacksonville drops flat-priced roll-offs across Duval County, from Riverside bungalows to Mandarin ranch remodels.
| Dumpster size | Best-fit project | Flat all-in price |
|---|---|---|
| 10-yard | Single-room remodel, small porch roof, ~1,500 sq ft of shingles | $595 |
| 15-yard | Bathroom + kitchen gut, small garage roof | $650 |
| 20-yard | Typical single-family shingle tear-off (~2,000, 2,500 sq ft) | $695 |
| 30-yard | Multi-room renovation, whole-house flooring, 3-layer tear-off | $795 |
| 40-yard | Large gut renovation, steep or oversized roof tear-off | $895 |
Roofing & renovation dumpster sizes and flat all-in prices in Jacksonville
What size dumpster do I need for a roofing or renovation project in Jacksonville?
A 20-yard dumpster ($695) matches a standard single-family shingle tear-off of roughly 2,000 to 2,500 square feet, and a 30-yard ($795) matches most full-house renovations. Roofing debris is dense: a single layer of asphalt shingles from a 2,000 sq ft roof weighs about 4,000 to 6,000 pounds, so a 20-yard bin absorbs the weight without overfilling. A 10-yard ($595) suits a one-room remodel or a small porch roof. Renovation debris, drywall, cabinets, flooring, framing, is bulkier and lighter than shingles, so square footage of trash, not weight, drives the size choice.
Roofing tear-offs load heavy, so size by weight not volume
Asphalt shingles pack far more weight into less space than renovation debris. One square of shingles (100 sq ft) weighs roughly 200 to 350 pounds, and a three-layer tear-off triples that. For a single-layer tear-off on a typical Jacksonville ranch, a 20-yard ($695) holds the load without exceeding the road-legal weight the truck can lift. For a two- or three-layer tear-off, or a larger two-story roof, a 30-yard ($795) keeps the debris under one lid. Because the pricing is flat and all-in, a heavy shingle load does not trigger a surprise tonnage charge.
Renovation debris is bulky, so match the yardage to room count
Renovation waste, old cabinets, drywall, subfloor, trim, and framing, fills space fast but weighs less per cubic foot than shingles. A single-room remodel fits a 10-yard ($595), which holds about 4 pickup-truck loads. A kitchen-and-bath gut fits a 15-yard ($650). A whole-house flooring or multi-room renovation fits a 30-yard ($795), roughly 12 pickup loads. If the job includes both a tear-off and interior demo running at the same time, a 40-yard ($895) keeps everything in one bin instead of paying for two drops.
How to pick the right roll-off size in three steps
First, count the rooms or measure the roof: a single room or a roof under 1,500 sq ft points to a 10-yard, while a full house points to a 30-yard. Second, identify the material, dense shingles or concrete cap the fill line lower than light drywall and wood. Third, account for pace: if debris will pile up over a multi-week Riverside restoration, size up one step so the bin does not fill before the job ends. If it is a single-room cleanout, choose the 10-yard; if it is a roof tear-off, choose the 20-yard.
Flat all-in pricing removes the surprise-fee guesswork
Every size carries one flat price with no separate tonnage, fuel, or delivery fee: 10-yard $595, 15-yard $650, 20-yard $695, 30-yard $795, and 40-yard $895. The minimum charge is $595. A dumpster rental is not junk removal, the crew delivers, sets, and hauls the bin, and the customer loads it. The quoted price is the total, so a heavy roofing load in a 20-yard does not become a $900 invoice after weigh-in the way weight-based rentals often do.
Jacksonville roofing and renovation dumpster specifics
Jacksonville sits in Duval County, and roll-off delivery runs across Riverside, Avondale, San Marco, Springfield, Mandarin, Arlington, Ortega, Southside, Murray Hill, and the Northside. Older Riverside and Springfield homes often have narrow driveways and mature oak canopies, so a 20-yard usually fits where a 40-yard cannot clear the setback. If the dumpster must sit on a public street or right-of-way, the City of Jacksonville may require a right-of-way permit, a driveway placement avoids that step. Placing plywood under the wheels protects the softer paver and older concrete drives common in Avondale and Ortega. Same-day or next-day drop covers most Jacksonville neighborhoods, weather permitting during the summer storm season.
Related questions
How much does it cost to rent a dumpster in Jacksonville?
Flat all-in pricing runs $595 for a 10-yard up to $895 for a 40-yard, with no separate tonnage or fuel fees. The minimum charge is $595.
Can I get a same-day dumpster rental in Jacksonville?
Same-day or next-day drop-off covers most of Duval County, weather permitting; ordering early in the day gives the best chance of a same-day set.
Do I need a permit for a dumpster in Jacksonville?
A dumpster placed on a private driveway needs no permit; one placed on a public street or right-of-way may require a City of Jacksonville right-of-way permit.
What can't go in a roofing or renovation dumpster in Jacksonville?
Roofing and renovation bins take shingles, drywall, wood, and flooring, but not paint, tires, appliances with refrigerant, or hazardous liquids.
How many pickup truck loads fit in a 20-yard dumpster?
A 20-yard dumpster holds roughly 8 pickup-truck loads, which fits a typical single-family shingle tear-off of about 2,000 to 2,500 square feet.
Home Run Dumpster Rental